Are you a retailer or a brand supplier?
this wayCoatings for
Product information for manufacturers
Virtually our entire Bakeware Spray range is without intentionally added PFAS or PTFE. Coating systems for this segment work on substrates such as aluminum, aluminized steel, or even steel, are baked at 280 °C and should have a layer thickness of between 15 and 30 µm.
ILAFLON Resist SP-800
| Base | Silicone polyester |
| Number of layers | 2 |
| Coating thickness | 20 - 25 µm |
| Curing temperature to approx | 280 °C |
ILAFLON Resist Plus
| Base | Resin combination |
| Number of layers | 2 |
| Coating thickness | 20 - 35 µm |
| Curing temperature to approx | 280 °C |
ILAFLON Resist SP-500
| Base | Silicone polyester |
| Number of layers | 2 - 3 |
| Coating thickness | 20 - 30 µm |
| Curing temperature to approx | 280 °C |
ILAFLON Select SP-300
| Base | Silicone polyester |
| Number of layers | 1 |
| Coating thickness | 15 - 25 µm |
| Curing temperature to approx | 280 °C |
CERALON 2 in 1
| Base | Sol-Gel |
| Number of layers | 1 - 2 |
| Coating thickness | 25 - 35 µm |
| Curing temperature to approx | 240 °C |
ILACOLOR SP
| Base | Silicone polyester |
| Number of layers | 1 |
| Coating thickness | 12 - 20 µm |
| Curing temperature to approx | 380 °C |